Celrien | OBD2 Scanner - Read and Clear Engine Fault Codes, Live Data and I/M Readiness

A handheld OBD2 scanner that tells you why the check engine light is on before you pay a shop to read it. It plugs into the diagnostic port under the dash and draws power from the car, so there are no batteries to replace. The colour screen walks through read codes, erase codes, freeze frame and I/M readiness from a simple menu, and a built-in code library explains what each fault code means.

Features

• Reads and clears engine fault codes
• Turns off the check engine light once the fault is fixed
• I/M readiness check before an emissions test
• Freeze frame data from the moment the fault triggered
• MIL status and misfire monitor
• Live data stream from the car's sensors
• Battery voltage reading and oxygen sensor test
• Vehicle information lookup and built-in fault code library
• Colour screen with menu navigation and a keypad
• Powered by the car's OBD2 port, no batteries needed
• Measures 4.75 x 2.73 x 0.82 inches (12.07 x 6.94 x 2.09 cm)

Compatibility

• Works with OBDII and EOBD vehicles, which is most cars sold in the US from 1996 onward
• Operating voltage up to 36 V

What's Included

• 1 OBD2 scanner with attached cable